Solid Signal Forums

Go Back   Solid Signal Forums > Gear & Accessories > Cellular Reception Equipment > Wi-Ex zBoost (Wireless Extenders) > Wi-Ex zBoost Accessories
Home Forums Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 06-06-2007, 01:19 PM
ASBGROUP ASBGROUP is offline
Forum Member
 
Join Date: Jun 2007
Posts: 1
Default Multiple Indoor Antennas

Recently I bought a YX500-PCS repeater. Also I added the outside directional antenna YX023-PCS. Now my G3 phone from Cingular (ATT) is working with good signal in one section of the house. Before installing the repeater it was impossible to receive or make calls with that carrier even in the outside of the house.
It is possible to add an splitter or combiner with multiple antennas at the output of the repeater to reach other levels of my house?
If not, how I can extend the signal further?
(I don't think that just adding the inside directional antenna will solve the coverage problem)...

ASB Group, Inc.
Reply With Quote
  #2 (permalink)  
Old 06-06-2007, 02:14 PM
SolidSignal_Musa's Avatar
SolidSignal_Musa SolidSignal_Musa is offline
Employee
 
Join Date: Jan 2007
Location: West Bloomfield, Michigan
Posts: 49
Default YX500 location

The YX500 is a great product and we get great feedback on it. Have you tried to relocate it? Usually placing a YX500-PCS or YX500-CEL in a central location resolves most issues.

Unfortunately is it not possible to split or add a combiner to the repeater. Some customers purchase multiple units & place them in strategic locations to insure coverage throughout.

Keep in mind the weaker the outdoor signal = less coverage area inside. The inside antenna will work for you, however its directional and will only benefit when it is pointed in one direction.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dish 1000.2 Makes it Easier to Hook-up Multiple Receivers SolidSignal_Katie Dish Network Product Info 1 10-08-2007 09:10 PM
Combining TV reception signals from two different directions using two TV antennas SolidSignal_Cliff Over The Air Television 2 06-18-2007 08:16 AM
Further Indoor Coverage for Your YX500 SolidSignal_Katie Wi-Ex zBoost Accessories 0 05-22-2007 03:06 PM
Connecting Multiple TVs to One HR20 Digital_Guy HR20 DIRECTV PLUS+ HD DVR Receiver 1 03-30-2007 04:39 AM


All times are GMT -5. The time now is 01:56 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.0.0
©1999 - 2007, Solid Signal, Signal Group LLC & Affiliates